Diagnostic Coding Software For Bmw MINI on Lenovo with DCAN ENET Cables
Diagnostic & Coding & Programming Engineering Professional Software for BMW MINI RR covering cars from 1998 to 2021. All engineering tools were installed on the Lenovo Thinkpad laptop and were tested. Some specs of the laptop. RAM - 8GBHDD Drive 500GB. Good battery, charger, up-to-date Windows 10 Pro. K+DCAN + ENET+ ENET plug and interface cables used for RR, BMW E F I G range from 1998 to 2021, and MINI R and F models. ISTA+ Diagnostic dealer-level software with full coding data allowing flashing of firmware (i-step upgrade up to Aug-2021). ISTA-P (for BMW E-Series, MINI Models).
INPA E-SYS NCS, Winkfp, Tool32 - engineering software for early F series or older BMW E SERIES, like e60, e90, e89, etc. E-Sys with the launcher (for coding flashing BMW F, G, i, MINI F) - Coding tool for coding flashing ecu blocks individually or as an overall scope.
Head Unit iDrive service history manager for writing service history in iDrive. ALL SOFTWARE IS SET TO WORK WITH ENET AND K+DCAN CABLES (you can use BMW Actia iCom too). With this diagnostic variant, you can diagnose all BMW, MINI, and ROLLS-ROYCE vehicles from 1996 to the end of October 2021. Coding, programming, learning, calibrating, FSC generation for navigation, and updating any or all ECUs. You can use the device to read out the faults in your vehicle.
Enter your vehicle and your code individually and make adjustments, e. Record the battery change and module (ECU) error when reading and erasing. Check injectors, real-time correction quantity check, injector coding, engine installation check. Code all control units individually or completely. Remove gearbox (transmission) and motor adaptations.
Wiring diagrams, phase data, repair instructions, technical documentation, and instructions on how to use the preinstalled software. Software is suitable for all E, F, I, G, and M models of all MINI and Rolls-Royce as well as for BMW motorcycles! Perfect device for workshops and professionals who don't want to spend hours in setting up the software and fixing various communication errors. If you have any questions, please do not hesitate to contact me.