MUCAR CS90 Full OBD2 Engine Diagnostic Scanner Tool SAS TPMS Reset 28 Services

MUCAR CS90 OBD2 Engine Code Reader Car Diagnostic Scanner Tool 28+ Services. MUCAR CS90 Engine Diagnostic Scanner Professional Reset Tool For Mechanic & Workshop.

MUCAR CS90 supports Engine Diagnosis ONLY. The CS90 diagnostic tool is an enhanced engine system scan, the fastest 60 seconds can be completed.

Note: It's not a full system diagnostic tool, if this affects your use, please select MUCAR VO6. Make a Better Detection for Car Engine System.

This section is specifically designed for the engine called the "car heart". It is necessary to keep an eye on the engine status to ensure the efficient operation of the engine to ensure your travel safety.

In addition, it can also be used before you send the car to environmental detection. All Resets Lifetime Free for All Cars. MUCAR CS90 currently supports 28 maintenance software, The maintenance software is completely. Free to use and free to upgrade.

Allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil. EPB Electronic Park Brake Reset. It is important in the maintenance of electronic braking system's safety and efficiency. Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.

DPF Diesel Particulate Filter Reset. Specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.

SAS Steering Angel Sensor Reset. Helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration. TPMS Tire Pressure Monitoring System Reset. Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors. In order to prevent the car from being used by illegal keys, through the anti-theft key matching function, the car can only be used normally after the anti-theft device control system on the car recognizes and authorizes the remote control.

ABS brake bleeding to get a firm brake pad after air exhaustion after repair ABS pump system. The sunroof needs to be reset when the sunroof control unit have communication problem or changed.

Try reset electronic suspension air ride with the massage system close all doors koeo flip through messages system go to suspension reset or on off. Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern. After you follow this programming method of the TCU / ECU drive the car.

AFS' means Adaptive Front lighting System (at night with the Bi-Xenon headlights) it swivels either side, pressing that button means they stay pointing straight ahead and don't turn when you turn the steering wheel. Leaking injectors and some dead injectors can be missed even when an injector is disabled. Other problems with the ignition system and mechanical components also may not show an rpm loss when an injector is turned off. The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine.

In an electronically fuel injected car, a throttle position sensor and air flow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning throttle sensor position after clearing or repair. The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.

Reduce nitrogen oxides (NOx) in the exhaust gas and improve fuel economy at partial load. This function is applied to set or learn Air/Fuel ratio parameters. Adblue Reset(Diesel Engine Exhaust Gas Filter). After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea reset operation is required.

This function resets the airbag data to clear the airbag collision fault indicator. Use this function to activate the electronic water pump before venting the cooling system.

This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox is disassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impact problem.

In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift. This function is used to change the system language of the vehicle central control panel. Nox sensor is a sensor used to detect the content of nitrogen oxides (Nox) in engine exhaust.

Lf the Nox fault is re-initialized and the Nox catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine Ecu. A ODO reset is to copy, write, or rewrite the value of kilometers in the chip of odometer by using a car diagnostic computer and data cable, so that the odometer shows the actual mileage.

BUsually when the mileage is not correct due to the damaged vehicle speed sensor or odometer failure, it. Is necessary to do ODO reset after maintenance. This function is used to open or close the automatic start-stop function via setting the hidden function in ECU(provided that the vehicle has a hidden function and supported by hardware).

This function is applied to match the seats with memory function that are replaced and repaired. This feature is designed to perform door window matching to recover ECU initial memory, and recover the automatic ascending and descending function of power window.

I/M readiness: is used to identify what powertrain information is available to the scan tool. Read the Fault Codes: lists the emission-related "confirmed" diagnostic trouble codes stored. It displays exact numeric, 4-digit codes identifying the faults. Clear the Fault codes: is used to clear emission-related diagnostic information.

This includes clearing the stored pending/confirmed DTCs and Freeze Frame data. O2 Sensor Test: displays the oxygen sensor monitor screen and the test results gathered about the oxygen sensor. On-Board Monitoring Test: this is a Request for On-Board Monitoring Test Results for Continuously and Non-Continuously Monitored systems. There are typically a minimum value, a maximum value, and a current value for each non-continuous monitor. Live Data in graphs such as engine RPM, temperatures, ignition advance, speed, etc.

EVAP Test:could enable the off-board test device to control the operation of an on-board system, test, or component. Request Vehicle Information:VIN, CALID, CVN(s). DTC Lookup: lists "permanent" diagnostic trouble codes stored, and view the code meaning online via Google.

Turn on the scanner 2. English, French, German, Italian, Spanish, Portuguese, Japanese, Russian, Polish, Hungarian, Arabic, Greek, Slovak. Support 126+ Car Brands and 1000+ Vehicles.

USA: For BXGM, For CHRYSLER, For AUSTFORD, For GM, USAFORD EUROPE: For ASTONMARTIN, For AUDI, For BENZ, For BMW, For BXFIAT, For CITROEN, For FERRARI, For FIAT, GAZ, For LANDROVER, For MASE, RATI, For OPEL, For PAZ, PEUGEOT, For PORSCHE... Austrillia: For AUSTFORD, For AUSTHOLDEN Asia: For BAIC, For CHANGAN, CHANGCHENG, For CHANGHE, For DAEWOO, For DAIHATSU, For DFXK, FLYER, For FUTIAN, For HAFEL HMAZDA, For HONDA, For HUACHEN, For HYUNDAI, IKCO, For INDIANMARUTI, For INDIANTATA, ISUZU, For IVECO. IZH, For JACTY JIAO, For JINLONG, For JOYLONG, For JPISUZU, For KIA, For LIFAN, For LIUWEITY, For LUXGEN, For MAHINDRA, For MALAYSIA PERODUA, For MALAYSIA PROTON, For MARUT, For MAXUS, For MAZDA, For MITSUBISHI..

Show the detailed description of the Diagnostic Trouble Code (DTCs). Turns off Check Engine Light (MIL), clears codes and resets monitors. Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data. Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

Show the information of continuous data stream from a vehicle in live graphic (waveform) display. CPU:MT6580 CORTEX-A7 1.3GHz/4Core Memory:1GB DDR3/16GB EMMC Display:5 Inch/ 480854 MIPI LCD Display Screen TP:GT911 GFF WIFI:802.11b/g/n 2.4GHz USB:TYPE C1 Battery:3.7V / 600mAH Lithium Polymer Power Input:OBD 12V input or TYPE C 5V input.